Ukuran asli(Berkas SVG, secara nominal 512 × 355 piksel, besar berkas: 397 KB)
Berkas ini berasal dari Wikimedia Commons dan mungkin digunakan oleh proyek-proyek lain.
Deskripsi dari halaman deskripsinya ditunjukkan di bawah ini.
Ringkasan
DeskripsiIron carbon phase diagram.svg
English: Iron–carbon phase diagram, at atmospheric pressure
This diagram is limited by pure iron on the left and by iron carbide on the right. The mains phases are:
iron: ferrite, ferritic steel
iron: austenite, austenitic steel
iron carbide: cementite, Fe3C.
It shows a eutectic and a eutectoid; these phases crystallise as a stacking of fine strips of pure phases (iron and cementite) in case of the eutectoid, or a pure iron containing small balls of cementite for the eutectic. Although it is heterogeneous, these phases behave like homogeneous pure bodies.
Steel is between 0 and 2.06 mass percent of carbon. Cast iron is between 2.06 and 6.67%.
Black lines indicate the metastable Fe/Fe3Cphase, red is the stable Fe/Carbon phase
This diagram is for illustrative purposes only, and is not thermodynamically accurate.
Español: Diagrama de fases hierro-carbono a presión atmosférica
Este diagrama está delimitado por hierro puro a la izquierda y carburo de hierro a la derecha. Las fases principales son:
Hierro: ferrita, acero ferrítico
Hierro: austenita, acero austenítico
Carburo de hierro: cementita, Fe₃C.
Se muestran un eutéctico y un eutectoide; estas fases cristalizan como un apilamiento de finas tiras de fases puras (hierro y cementita) en el caso del eutectoide, o un hierro puro con pequeñas esferas de cementita en el caso del eutéctico. Aunque heterogéneo, estas fases se comportan como cuerpos puros homogéneos.
El acero contiene entre 0 y 2,06 % en masa de carbono. El hierro fundido contiene entre 2,06 y 6,67 %.
Las líneas negras indican la fase metaestable Fe/Fe₃C; las rojas, la fase estable Fe/Carbono.
Este diagrama es solo para fines ilustrativos y no es termodinámicamente preciso.
Tanggal
Sumber
Karya sendiri
Läpple, Volker - Wärmebehandlung des Stahls Grundlagen, Verfahren und Werkstoffe 8. Auflage, Seite 55ff.
Weißbach, Wolfgang - Werkstofkunde Strukturen, Eigenschaften, Prüfung 17. Auflage, Seite 76ff.
untuk berbagi – untuk menyalin, mendistribusikan dan memindahkan karya ini
untuk menggubah – untuk mengadaptasi karya ini
Berdasarkan ketentuan berikut:
atribusi – Anda harus mencantumkan atribusi yang sesuai, memberikan pranala ke lisensi, dan memberi tahu bila ada perubahan. Anda dapat melakukannya melalui cara yang Anda inginkan, namun tidak menyatakan bahwa pemberi lisensi mendukung Anda atau penggunaan Anda.
berbagi serupa – Apabila Anda menggubah, mengubah, atau membuat turunan dari materi ini, Anda harus menyebarluaskan kontribusi Anda di bawah lisensi yang sama atau kompatibel dengan lisensi pada materi asli.